UP 378 — Nassau to San Salvador
UP 378 Schedule
Bahamasair runs NAS to ZSA every day. Scheduled block time is 1h. Typically a ATR 42-600.
ATR 42-600 (AT46)
Scheduled equipment: ATR 42-600. ATR-built. Registration, build year, and photo fill in the moment the aircraft broadcasts.
NAS to ZSA
Bahamasair is the only nonstop operator on this route. Compare schedules, codeshares, and on-time performance across every operator on the full route page.
UP 378 Flight Path
Cruise altitude, ground speed, and vertical rate from ADS-B broadcasts. The altitude profile fills in while UP 378 is airborne, capturing climbs, step-climbs, and descents in real time.
Flight path chart appears once UP 378 is airborne and broadcasting.
Frequently Asked Questions
If a plane icon is moving on the map, yes. That's ADS-B, the aircraft's own GPS position broadcast, updated every few seconds. No icon means the flight isn't airborne at the moment: either before pushback, already landed, or a day it doesn't operate.
Scheduled equipment is the AT46. The live tracker shows the actual tail and registration when UP 378 is airborne. Carriers swap aircraft often enough that you'll sometimes see a different airframe than the scheduled type.
Every day of the week. On days outside that pattern this page will show the schedule but no live aircraft.
Scheduled 1h 0m gate to gate from NAS to ZSA. Actual air time varies with winds and ATC routing. Tailwinds can shave 15 to 20 minutes on long segments.
GPS-accurate via ADS-B. Typically within 30 meters horizontally, updated every 5 to 10 seconds. If the broadcast drops over oceans or mountainous terrain, the map holds the last-known position and the label changes to reflect the signal gap.
A projection from current position, groundspeed, and remaining distance. It doesn't account for descent procedures, holding, or ATC vectoring near the destination. Trust it within plus or minus 10 minutes once the flight is past the halfway mark.