GF 4327 — Dallas-Fort Worth to Brownsville
GF 4327 Schedule
Great Barrier Airlines runs DFW to BRO every day. Scheduled block time is 1h 43m. Typically a Embraer 170.
Embraer 170 (E70)
Scheduled equipment: Embraer 170. Embraer-built. Registration, build year, and photo fill in the moment the aircraft broadcasts.
GF 4327 Flight Path
Cruise altitude, ground speed, and vertical rate from ADS-B broadcasts. The altitude profile fills in while GF 4327 is airborne, capturing climbs, step-climbs, and descents in real time.
Flight path chart appears once GF 4327 is airborne and broadcasting.
Frequently Asked Questions
If a plane icon is moving on the map, yes. That's ADS-B, the aircraft's own GPS position broadcast, updated every few seconds. No icon means the flight isn't airborne at the moment: either before pushback, already landed, or a day it doesn't operate.
Scheduled equipment is the E70. The live tracker shows the actual tail and registration when GF 4327 is airborne. Carriers swap aircraft often enough that you'll sometimes see a different airframe than the scheduled type.
Every day of the week. On days outside that pattern this page will show the schedule but no live aircraft.
Scheduled 1h 43m gate to gate from DFW to BRO. Actual air time varies with winds and ATC routing. Tailwinds can shave 15 to 20 minutes on long segments.
GPS-accurate via ADS-B. Typically within 30 meters horizontally, updated every 5 to 10 seconds. If the broadcast drops over oceans or mountainous terrain, the map holds the last-known position and the label changes to reflect the signal gap.
A projection from current position, groundspeed, and remaining distance. It doesn't account for descent procedures, holding, or ATC vectoring near the destination. Trust it within plus or minus 10 minutes once the flight is past the halfway mark.