DX 46 Schedule
DAT runs CPH to RNN every day. Scheduled block time is 40m. Typically a Aerospatiale/Alenia ATR 72.
Aerospatiale/Alenia ATR 72 (AT7)
Scheduled equipment: Aerospatiale/Alenia ATR 72. Aerospatiale/Alenia-built. Registration, build year, and photo fill in the moment the aircraft broadcasts.
CPH to RNN
DAT is the only nonstop operator on this route. Compare schedules, codeshares, and on-time performance across every operator on the full route page.
DX 46 Flight Path
Cruise altitude, ground speed, and vertical rate from ADS-B broadcasts. The altitude profile fills in while DX 46 is airborne, capturing climbs, step-climbs, and descents in real time.
Flight path chart appears once DX 46 is airborne and broadcasting.
Frequently Asked Questions
If a plane icon is moving on the map, yes. That's ADS-B, the aircraft's own GPS position broadcast, updated every few seconds. No icon means the flight isn't airborne at the moment: either before pushback, already landed, or a day it doesn't operate.
Scheduled equipment is the AT7. The live tracker shows the actual tail and registration when DX 46 is airborne. Carriers swap aircraft often enough that you'll sometimes see a different airframe than the scheduled type.
Every day of the week. On days outside that pattern this page will show the schedule but no live aircraft.
Scheduled 0h 40m gate to gate from CPH to RNN. Actual air time varies with winds and ATC routing. Tailwinds can shave 15 to 20 minutes on long segments.
GPS-accurate via ADS-B. Typically within 30 meters horizontally, updated every 5 to 10 seconds. If the broadcast drops over oceans or mountainous terrain, the map holds the last-known position and the label changes to reflect the signal gap.
A projection from current position, groundspeed, and remaining distance. It doesn't account for descent procedures, holding, or ATC vectoring near the destination. Trust it within plus or minus 10 minutes once the flight is past the halfway mark.